Company name Shanghai Yili Industrial Co., Ltd.
Contact person Manager Li
Electric
Hand
Online
Gasoline argon arc welding machine
Product model
Starting method electric start
No-load voltage
Working voltage
Current adjustment range
Load duty cycle﹪
Auxiliary power supply voltage
Auxiliary power supply power
Oil warning system has
Engine model
Cooling method air cooling
Valve type
Discharge volume
Ignition system non-contact transistor ignition
Fuel tank capacity< br/> Remarks: Dual-purpose machine for power generation/with argon arc welding
Long resistant welding rod, maximum welding rod\
During welding, it is not allowed to adjust the current. You must use the handle to adjust the current of the welding machine when welding is stopped. Do not press too hard or too fast to avoid damaging the regulator. When starting the DC welding machine, check that the direction of rotation of the rotor matches the direction of the arrow on the welding machine mark. After the welding is completed, the power supply of the welding machine should be cut off and the operating location should be checked to make sure there is no open flame before leaving. When welding catches fire, you should first cut off the power of the welding machine, and then use a fire extinguisher such as carbon dioxide dry powder to extinguish the fire. Safety operating procedures for electric welding machines (AC and DC). The electric welding machine must comply with the current safety requirements for welding machines. The working environment of the electric welding machine should be consistent with the regulations in the welding machine manual. If the temperature is too high or too low, the humidity is too high, the air pressure is too low, and the environment is corrosive or explosive, you should use a welding machine suitable for the environmental conditions or take protective measures to prevent the welding machine from being hit or violently vibrated. The welding machine used outdoors must It has protective measures against rain and thunder
Scope of application: This product is light in weight, small in size and easy to move. It can be used for welding or as a separate generator. It is suitable for welding construction and emergency repairs in areas without electricity in the field. (Welding rods that can be used) Features of the set: The welding/generating set adopts two medium-frequency three-phase full-wave rectifiers to stabilize the welding current. Small current welding is easy to arc, the welding effect is good, the spatter is small, and the welding shape is beautiful. Auxiliary power supply DC/, It uses resistance controlled excitation to adjust the welding current, which can be adjusted at any time, has a lower failure rate, and has a high load endurance rate and can perform continuous welding operations. It is a welding machine produced for professional welding. Scope of application: This product is light in weight, small in size, easy to move, has high load endurance, and has a special appearance design. It is widely suitable for long-term use in machinery, manufacturing, natural gas/water pipelines, railways, petroleum pipelines, power construction, chemical industry, construction, and other industries, field construction, emergency repairs, and high-altitude operations. . (Welding rods that can be used)
Gasoline argon arc welding machine YT250AW