When the welding machine is overloaded, it should be able to automatically cut off the power supply. It is forbidden for multiple welding machines to share one power switch. The power supply control should be installed near the welding machine in a place that is easy to operate by hand. There should be a safe passage around it. The exposed live parts of the welding machine should be equipped with complete protection devices. The exposed terminals of the welding machine must be equipped with The protective cover must place the welding machine smoothly in a well-ventilated and dry place. It is not allowed to be close to high-heat or flammable and explosive environments. It is prohibited to put any objects or tools on the welding machine. Before starting the welding machine, the welding clamps and welding parts must not be placed. If the short-circuit welding machine gets damp, it should be dried manually. If the damp is serious, it must be repaired. The contact between the brushes and the commutator of the rotary DC welding machine must be checked frequently. It is required that the pressure of the brushes on the surface of the commutator is uniform, so that all the electric The current passing through the brushes should be consistent. When the brushes are worn or damaged, they must be replaced in time. Check frequently and keep the welding machine cable in good contact with the contact post of the welding machine, and keep the nuts tight
The welding machine should be placed in a rainproof and well-ventilated place. place. Diesel generator welding machine
It is not allowed to pile up flammable and explosive items at the welding site. When using the welding machine, you must wear protective equipment as required. The length of the wire between the welding machine and the welding tongs shall not exceed the length. If necessary, it shall not exceed the length. If the conductor is damaged by moisture and has its strands broken, replace it immediately. When welding and preheating workpieces, heat insulation measures such as asbestos cloth or baffles should be used. Protective glasses or a mask should be worn to prevent iron slag from splashing and injuring people. When multiple welding machines are welding at the same time, the welding platform or weldment must be grounded and a light-proof shed must be installed. A reasonable welding process should be selected based on the technical conditions of the workpiece (the electrode welding current and duty cycle are not allowed to be used for high current welding, and the electric welding machine is not allowed to be used for metal cutting operations. The temperature rise of the welding machine during load welding should not exceed 0°C °C, otherwise stop and cool down before welding. The working area of the welding machine should be kept dry and well ventilated. When moving the welding machine, the power supply should be cut off. Do not move the welding machine by dragging the cable. If there is a sudden power outage during welding, the power supply should be cut off.
Learn about the English version parameters and more generators\\\\\\, digital variable frequency generators\\\, permanent magnet generators, small diesel generators, silent diesel generators, multi-fuel generators, large power generation For unit and integrated power generation and welding machine
For water pumps, please call the manufacturer’s hotline
For prices of gasoline generators, please see the official website or negotiate by phone
YT6800EW_190A diesel generator welding machine