Shanghai Ito Gasoline Generator Co., Ltd (Jiading)

Factory direct sales picture
Vehicle silent generator household small gasoline generator RV generator
Product label new type
Rated frequency
Rated voltage/
Rated current
br/>Rated speed
Rated output
Maximum output
DC output
Phase number single
Fuel capacity
Collected fuel consumption/
Continuous operating time
Noise level/
Dimensions
Packing size
Net weight
Recoil starter hand pull
Fuel type automobile unleaded gasoline
Engine model special number generator
Engine model
Single-cylinder four-stroke air-cooled overhead camshaft gasoline engine
Bore stroke displacement
Compression ratio
Rated power
Ignition systembr/>Spark plugs/
Minimum fuel consumption/
_
_
_
_
_
_
How to maintain a household generator
In the daily maintenance of a household generator, you should pay attention to the following points
Be careful to prevent rain and collision when working and transporting a household generator, and do not damage the coil windings during maintenance. Do not store in a humid place.
Do not work in places with flying dust or corrosive and explosive gases. Remove oil and dust in time to ensure that the machine is clean
The cross-connecting belt must not be too loose or too tight. Too loose will cause the belt to slip and cause the output voltage to be unstable. Too tight will damage the armature bearing and frame, and reduce the power of the household generator. . Therefore, the tightness of the belt should be checked and adjusted frequently. Press the middle part of the belt with your hands to make it droop left and right.
Regularly add grease to the bearings at both ends of the armature. Ensure good lubrication and reduce wear. Generally, during normal operation, butter should be added once every six months and once every year at most.
Do not use gasoline, kerosene, water, etc. to clean the armature winding and excitation winding. Otherwise, the insulation of the coil will be damaged and the coil will get damp. When cleaning, you can first blow away the dust with a leather blower, and then sweep it with a brush or wipe it clean with a cloth.
The contact surface between the collector ring commutator and the brush should not be stained with oil or dirt. If there is dirt, it should be removed in time to avoid poor contact.
Replace excessively worn brushes and failed brush springs promptly. If the contact surface between the brush and collector ring or commutator is too small, the brush contact surface should be ground.
If there are sparks at the contact between the brush and collector ring or commutator, loose plugs and sockets and poor contact, etc., they should be eliminated in time
The distribution box should be moisture-proof, impact-proof and shock-proof to avoid damage to instruments and other devices. The safety device and other connectors should be in good contact, and damaged ones should be replaced in time.
The distribution box should be equipped with commonly used spare parts and tools to meet emergencies.
The above is the detailed content on how to maintain a household generator. For more information on how to maintain a household generator, continue to follow Ito Power, thank you! ! !
Company name Shanghai Yili Industrial Co., Ltd.
Sales manager Li Yangyang
Contact number/
E-mail@
Online customer service
Company address Jiading District, Shanghai Changji Road Volkswagen Creative Park
Transaction method Purchase and sale contract Alipay transaction
Transaction mode transfer Alipay cash check swipe card
About the product including VAT, not including freight, nationwide hourly delivery.